The AirSense™ 10 CPAP is a basic fixed-pressure CPAP machine that is designed to make therapy easy.Product Features:
With no complicated settings or menus to navigate, simply press Start and you’re ready to go. It also comes with built-in humidification and can be used with the ClimateLineAir™ heated tube for optimal temperature and humidity delivered to your mask.
The Airsense™ 10 CPAP is a basic fixed-pressure CPAP machine that is designed to make therapy easy. It features an integrated humidifier and can be used with the ClimateLineAir™ heated tube for the optimal temperature and humidity delivered to your mask.
• Its user-friendly controls, intuitive interface and color LCD screen make it simple to navigate
menus and customize comfort settings.
• The AutoRamp™ feature delivers lower pressure until you fall asleep and then ramps up to your
prescribed level.
• The quiet Easy-Breathe motor makes for a peaceful environment for you and your bed partner.
• The SmartStart™ function allows you to begin therapy as soon as you breathe into your mask.
When you remove your mask, it stops automatically after a few seconds.Items included:
CPAP Machine
Integrated HumidAire Heated Humidifier
Standard Humidifier Chamber
ClimateLineAir Tubing
Power Supply and Cord
Travel Bag
1- Standard Filter (Uninstalled)
Filter Cover
Patient Manual
Weight - Machine with Water Chamber: 2.75 lbs (44 oz.)
Dimensions - Machine with Water Chamber: 10.04 in L x 4.57 in W x 5.91 in H
Weight - Standard Chamber: .54 lb
Weight - Machine with Side Cover (Without Water Chamber): Approx. 2.452 lbs
Dimensions - Machine with Side Cover (Without Water Chamber): Approx. 8 in L x 4.57 in W x 5.91 in H
Dimensions - Travel Bag: 13.24 in L x 10 in W x 5 in
Weight - Travel Bag Alone: 1.18 lb
Weight - Machine with Humidifier; Power Supply and Cord; ClimateLineAir Tubing; Travel Bag: Approximately 5.25 lbs
Water Chamber Capacity: 380 mL
Weight - 90W Power Supply, Cord and Plug: 1.29 lb
Dimensions - 90W Power Supply Only (Not including Cord or Plug): 5 1/2 in x 1 7/8 in x 1 1/4 in
AC Input Range - 90W Power Supply: 100 - 240V, 50 - 60Hz, 1.0 - 1.5A, Class II
DC Output - 90 W Power Supply: 24V --- 3.75A
Typical Power Consumption: 53W (57VA)
Peak Power Consumption: 104W (108VA)
Operating Pressure: 4 - 20 cm H2O
Length - ClimateLineAir Tubing: 6 feet
Materials - ClimateLineAir Tubing: Flexible Plastic
Materials - Water Chamber: Injection Molded Plastic, Stainless Steel, Silicone Seal
Materials - Standard Filter: Polyester non-woven fiber
Operating Temperature: 41° F - 95° F (5° C - 35° C)
Storage and Transport Temperature: -4° F - 140° F (-20° C - 60° C)
Operating Humidity: 10% - 95% Relative Humidity, non-condensing
Storage and Transport Humidity: 5% - 95% relative Humidity, non-condensing
Operating Altitude: Sea Level - 8500 Feet (2,591 M); Air pressure range 1013 hPa - 738 hPa
Maximum Temperature - Heating Plate: 154° F (68° C)
Maximum Temperature - Cut Out: 165° F (74° C)
Maximum Gas Temperature: Less than or Equal to 106° F (? 41° C)
IEC 60601-1:2005 Classification: Class II (Double Insulation), Type BF, Ingress protection IP22
Machine Warranty: 2 Years
Patient Weight: Greater than 66 lbs
Cleaning Instructions: The chamber should be taken apart and hand washed weekly using warm water and a mild detergent. It should be rinsed well and allowed to air dry out of direct sunlight before reassembling. The chamber should not be washed in a dishwasher or washing machine. The SlimLine hose should be washed in the same manner and allowed to completely dry out of direct sunlight before reattaching to the machine and mask